Electricity Generated by Hand Wheel

Published : 01-01-2015 by : Pawan Janorkar

Rating: 4/5 (34 votes)

The stator contains six coils of copper wire, cast in fibreglass resin. This stator casting is mounted onto the spine; it does not move. Wires from the coils take electricity to the rectifier, which changes the AC to DC for charging the battery. The rectifier is mounted on an aluminium 'heatsink' to keep it cool. The magnet rotors are mounted on bearings, which turn on the shaft. The rear rotor is behind the stator, and enclosed within it. The front one is on the outside, fixed to the rear one by long studs which pass through a hole in the stator. The wind turbine rotor blades will be mounted on the same studs. They will turn the magnet rotors, and move the magnets past the coils. Magnetic flux passes from one rotor to the other through the stator. This moving magnetic flux is what produces the electric power.

Applications
Billboard displays
Display lighting in art galleries to reduce heating on works to low values
Domestic lighting
Public transit vehicle route and destination signs
Railway signals
Stage lighting
Traffic lights
Train lights

Download seminar docs :

29122012191333-electricity-generated-by-hand-wheel.doc