Free download complete engineering seminar Steam Turbine Seminar Presentation
A steam turbine is a mechanical device that extracts thermal energy from pressurized steam, and converts it into rotary motion. Its modern manifestation was invented by Sir Charles Parsons in 1884.
Definitions of steam turbine:
A steam turbine is a mechanical device that extracts thermal energy from pressurized steam, and converts it into rotary motion. Its modern manifestation was invented by Sir Charles Parsons in 1884.A system of angled and shaped blades arranged on a rotor through which steam is passed to generate rotational energy. Today, normally used in power stations
A device for converting energy of high-pressure steam (produced in a boiler) into mechanical power which can then be used to generate electricity.
A machine for generating mechanical power in rotary motion from the energy of steam at temperature and pressure above that of an available sink. By far the most widely used and most powerful turbines are those driven by steam. Until the 1960s essentially all steam used in turbine cycles was raised in boilers burning fossil fuels (coal, oil, and gas) or, in minor quantities, certain waste products. However, modern turbine technology includes nuclear steam plants as well as production of steam supplies from other sources.
The illustration shows a small, simple mechanical-drive turbine of a few horsepower. It illustrates the essential parts for all steam turbines regardless of rating or complexity: (1) a casing, or shell, usually divided at the horizontal center line, with the halves bolted together for ease of assembly and disassembly; it contains the stationary blade system; (2) a rotor carrying the moving buckets (blades or vanes) either on wheels or drums, with bearing journals on the ends of the rotor; (3) a set of bearings attached to the casing to support the shaft; (4) a governor and valve system for regulating the speed and power of the turbine by controlling the steam flow, and an oil system for lubrication of the bearings and, on all but the smallest machines, for operating the control valves by a relay system connected with the governor; (5) a coupling to connect with the driven machine; and (6) pipe connections to the steam supply at the inlet and to an exhaust system at the outlet of the casing or shell.